Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Automatic Transmission/Transaxle
Model Year: 2008 Model: Sequoia Doc ID: RM0000013CK01IX
Title: A750E AUTOMATIC TRANSMISSION / TRANSAXLE: VALVE BODY ASSEMBLY: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY



(a) Install the spring and check ball body.

(b) Insert the pin of the manual valve into the hole of the manual valve lever.

(c) Install the 19 bolts.

Torque: 11 N·m (112 kgf·cm, 8 ft·lbf)

HINT:

Each bolt length is indicated below.

36 mm (1.42 in.) for bolt A

25 mm (0.984 in.) for bolt B

(d) Install the detent spring cover and detent spring with the bolt.

Torque: 10 N·m (102 kgf·cm, 7 ft·lbf)

2. CONNECT TRANSMISSION WIRE A750E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION (2008 Sequoia)+

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY A750E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION (2008 Sequoia)+

4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY A750E AUTOMATIC TRANSMISSION / TRANSAXLE: TRANSMISSION WIRE: INSTALLATION (2008 Sequoia)+

5. ADD AUTOMATIC TRANSMISSION FLUID A750E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION ASSEMBLY: INSTALLATION (2008 Sequoia)+

6. ADJUST AUTOMATIC TRANSMISSION FLUID

(a) Adjust automatic transmission fluid A750E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION FLUID: ADJUSTMENT (2008 Sequoia) .

7. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK